Carbon Nanotube-Based Chemiresistive Sensor Array for Dissolved Gases.
Journal Articles
Overview
Research
Identity
Additional Document Info
View All
Overview
abstract
Dissolved gases such as oxygen (DO) and ammonia (dNH3) are among the most consequential parameters for the assessment of water quality. Since the concentrations of DO and dNH3 are interdependent through the nitrogen cycle, simultaneous monitoring can be useful in many applications. For example, in wastewater treatment, aeration baths are used to adjust the rate of removal of ammonia by the bioactive sludge. Here, we have developed a sensing array which can monitor dissolved molecular oxygen (DO) and dissolved un-ionized ammonia (dNH3) continuously and simultaneously. This was achieved by functionalizing two sensors made from single-walled carbon nanotube (SWCNT) films with two different molecules: phenyl-capped aniline tetramer (PCAT) and iron phthalocyanine (II) (FePc). It was found that the FePc-doped SWCNT (FePc@SWCNT) sensors demonstrated good sensitivity and selectivity to DO, compared to dNH3. Conversely, we found that the PCAT-doped SWCNT (PCAT@SWCNT) sensors demonstrate greater sensitivity to ammonia. Investigating the effect of different PCAT salts as a dopant, we describe the following series of sensor responses to ammonia: chloride < crotonate < fumarate. Additionally, we coated our sensors with thin PDMS membranes, which are selectively permeable to gases, over ionic species. Finally, using principal component analysis (PCA) and partial least-squares discriminant analysis, it was possible to discriminate between responses to DO and dNH3, with 100% accuracy. As a result, here, we have developed a compelling proof-of-concept for the use of a single sensing substrate, doped with molecules with distinct mechanisms of interaction with two different analytes, to simultaneously monitor concentrations of two dissolved gases, in this example, DO and dNH3.
