Water Purification and Electrochemical Oxidation: Meeting Different Targets with BDD and MMO Anodes

The complex composition of natural organic matter (NOM) can affect drinking water treatment processes, leading to perceptible and undesired taste, color and odor, and bacterial growth. Further, current treatments tackling NOM can generate carcinogenic by-products. In contrast, promising substitutes such as electrochemical methods including electrooxidation (EO) have shown safer humic acid and algae degradation, but a formal comparison between EO methods has been lacking. In this study, we compared the Boron-doped diamond (BDD) electrode electrolysis performance for Suwannee River NOM degradation using mixed-metal oxide (MMO) anodes under different pH (6.5 and 8.5) representative of the high and low ranges for acidity and alkalinity in wastewater and applied two different current densities (10 and 20 mA cm−2). BDD anodes were combined with either BDD cathodes or stainless steel (SS) cathodes. To characterize NOM, we used (a) total organic compound (TOC), (b) chemical oxygen demand (COD), (c) specific ultraviolet absorbance (SUVA), and (d) specific energy consumption. We observed that NOM degradation differed upon operative parameters on these two electrodes. BDD electrodes performed better than MMO under stronger current density and higher pH and proved to be more cost-effective. BDD-SS electrodes showed the lowest energy consumption at 4.4 × 103 kWh kg COD−1. while obtaining a TOC removal of 40.2%, COD of 75.4% and SUVA of 3.4 at higher pH and current. On the contrary, MMO produced lower TOC, COD and SUVA at the lower pH. BDD electrodes can be used in surface water as a pre-treatment in combination with some other purification technologies to remove organic contaminants.