Weldability of thin sheet metals during small-scale resistance spot welding using an alternating-current power supply

The resistance weldability of 0.2-mm-thick sheet aluminum, brass, and copper in small-scale resistance spot welding (SSRSW) was studied. The effects of electrode materials and process parameters on joint strength and nugget size were investigated. The welding current ranges for SSRSW of the sheet metals were determined based on the minimum current that produced a required nugget diameter and maximum currents that did not result in electrode-sheet sticking or weld metal expulsion. A qualitative analysis indicated that resistance weldability of the metals is not only determined by their resistivity (or thermal conductivity) but is also affected by other physical properties (such as melting point, latent heat of fusion and specific heat).