Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing

publication venue for

In-situ investigation of damage mechanisms in duplex AlCoCrFeNi2.1 high entropy alloy. 884:145532-145532. 2023
Environment effect on internal fatigue crack propagation studied with in-situ X-ray microtomography. 882:145462-145462. 2023
Evolution of the microstructure and mechanical properties of a V-containing microalloyed steel during coiling. 880:145332-145332. 2023
Study of microstructure evolution of friction stir welded novel (Al-Zn-Mg)-Fe (HE700) cast alloys for automotive applications. 879:145274-145274. 2023
The role of texture and restoration mechanisms in defining the tension-compression asymmetry behavior of aged NiTi alloys fabricated by laser powder bed fusion. 864:144592-144592. 2023
Effect of heat input modes on microstructure, mechanical properties and porosity of laser welded NiTi-316L joints: A comparative study. 848:143426-143426. 2022
The influence of in-situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al–Si coated 22MnB5. 839:142830-142830. 2022
Laser welding-brazing of NiTi/304 stainless steel wires with beam defocus and large offset. 835:142660-142660. 2022
Solid solution induced back-stress in multi-principal element alloys: Experiment and modeling. 835:142621-142621. 2022
A novel approach to producing architectured ultra-high strength dual phase steels. 833:142582-142582. 2022
Effects of CGL-compatible thermal processing, starting microstructure, and Sn micro-alloying on the mechanical properties of a medium-Mn third generation advanced high strength steel. 833:142563-142563. 2022
Role of Fe2Al5 in fracture of novel dissimilar aluminum-steel resistance spot welds using multi-ring domed electrodes. 831:142233-142233. 2022
Twinning engineering of high-entropy alloys: An exercise in process optimization and modeling. 822:141681-141681. 2021
A combined experimental-analytical modeling study of the artificial aging response of Al–Mg–Si alloys. 820:141566-141566. 2021
Exploring stress equivalence for solid solution strengthened Mg alloy polycrystals. 816:141252-141252. 2021
A method for determining r-value of aluminum sheets with the Portevin-Le Chatelier effect. 814:141246-141246. 2021
The effect of chemical patterning induced by cyclic plasticity on the formation of precipitates during aging of an Al–Mg–Si alloy. 815:141265-141265. 2021
Corrigendum to ‘In situ neutron diffraction and crystal plasticity analysis on Q&P1180 steel during plastic deformation’ [Mater. Sci. Eng. A (2020) 140425]. 807:140890-140890. 2021
Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy. 800:140384-140384. 2021
In situ neutron diffraction and crystal plasticity analysis on Q&P1180 steel during plastic deformation. 802:140425-140425. 2021
NbC precipitation during two-pass hot deformation of a nickel-based model alloy at 700 °C: Experiments and modelling. 802:140447-140447. 2021
4D X-ray tomography characterization of void nucleation and growth during deformation of strontium-added AZ31 alloys. 797:140081-140081. 2020
Mechanical property development of a 0.15C–6Mn–2Al–1Si third-generation advanced high strength steel using continuous galvanizing heat treatments. 778:139111-139111. 2020
Microstructure and dynamic tensile characteristics of dissimilar fiber laser welded advanced high strength steels. 773:138729-138729. 2020
NbC precipitation during multi-pass deformation of a nickel-based model alloy: Experiments and modelling. 772:138748-138748. 2020
Effects of solutes and temperature on high-temperature deformation and subsequent recovery in hot-rolled low alloy steels. 765:138324-138324. 2019
Characterization of nano-sized precipitation and dislocations and the correlation with mechanical properties of a low alloy TRIP-aided steel. 763:138149-138149. 2019
Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion. 762:138081-138081. 2019
Effect of grain orientation and local strains on void growth and coalescence in titanium. 760:258-266. 2019
A criterion for ductile failure in age-hardenable aluminum alloys. 759:613-623. 2019
Comparative studies on the structure and properties of rapidly solidified and conventionally cast AM60 magnesium alloys. 759:346-356. 2019
Strong and ductile steel via high dislocation density and heterogeneous nano/ultrafine grains. 759:1-10. 2019
The effect of manganese on the microstructure and tensile response of an Al-Mg-Si alloy. 755:307-317. 2019
Bendability enhancement of an age-hardenable aluminum alloy: Part I — relationship between microstructure, plastic deformation and fracture. 753:179-191. 2019
Bendability enhancement of an age-hardenable aluminum alloy: Part II — multiscale numerical modeling of shear banding and fracture. 754:161-177. 2019
Predicting microstructure and strength for AISI 304L stainless steel forgings. 745:474-483. 2019
Numerical study of large strain behavior of OFHC copper: The role of latent hardening. 744:386-395. 2019
Identification of the role of Al-Fe-Mn-Si large casting dispersoids in age-hardenable aluminum alloys using small angle X-ray scattering. 734:51-58. 2018
Structure-property models in Al-Zn-Mg-Cu alloys: A critical experimental assessment of shape castings. 733:235-245. 2018
Misorientation development in continuous dynamic recrystallization of AZ31B alloy sheet and polycrystal plasticity simulation. 730:438-456. 2018
A new crystal plasticity framework to simulate the large strain behaviour of aluminum alloys at warm temperatures. 727:11-28. 2018
Effect of microstructure on tensile properties of electrospark deposition repaired Ni-superalloy. 729:268-275. 2018
Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions. 729:496-507. 2018
Microstructure-property relationship in a low carbon Nb-B bearing ultra-high strength steel by direct-quenching and tempering. 727:200-207. 2018
Influence of SC-HAZ microstructure on the mechanical behavior of Si-TRIP steel welds. 718:216-227. 2018
Kinetics and microstructural change of low-carbon bainite due to vanadium microalloying. 720:248-256. 2018
Mechanical behavior and microstructural evolution in rolled Mg-3Al-1Zn-0.5Mn alloy under large strain simple shear. 712:585-591. 2018
Method to decode stress-strain diagrams to identify the structure-strength relationships in aged aluminum alloys. 709:9-16. 2018
Microstructural evolution of adiabatic shear bands in pure copper during impact at high strain rates. 711:182-194. 2018
Nano-twinned steel exhibits high mechanical properties obtained through ultra-rapid heat treatment. 712:765-771. 2018
The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy. 714:140-145. 2018
Flow stress and electrical resistivity in plastically deformed Al subjected to intermittent annealing. 706:256-268. 2017
New insights into the mechanism of cooling rate on the impact toughness of coarse grained heat affected zone from the aspect of variant selection. 704:448-458. 2017
Structure-properties relationship of ultra-fine grained V-microalloyed dual phase steels. 703:293-303. 2017
Experimental investigation and through process crystal plasticity-static recrystallization modeling of temperature and strain rate effects during hot compression of AA6063. 700:374-386. 2017
Quantitative metallography of precipitating and secondary phases after strengthening treatment of net shaped casting of Al-Zn-Mg-Cu (7000) alloys. 698:206-217. 2017
Mechanical properties of Mg-Sc binary alloys under compression. 692:199-213. 2017
Twin-induced hardening in extruded Mg alloy AM30. 687:17-27. 2017
Modeling the deformation behavior of a rolled Mg alloy with the EVPSC-TDT model. 682:332-340. 2017
On the damage and fracture of commercially pure magnesium using x-ray microtomography. 676:146-155. 2016
Effects of tempering mode on the structural changes of martensite. 673:467-475. 2016
Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium. 671:221-232. 2016
Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel. 667:156-170. 2016
Low weight steel-magnesium composites achieved by powder compaction. 660:77-83. 2016
Microstructure, deformation mechanisms and influence of hydrogen on tensile properties of the Co based super alloy DIN 2.4711/UNS N30003. 662:36-45. 2016
Vacuum brazing of alumina to stainless steel using femtosecond laser patterned periodic surface structure. 662:178-184. 2016
Tailoring the mechanical properties of steel sheets using FeC films and diffusion annealing. 657:291-298. 2016
The effect of microstructure on damage and fracture in AZ31B and ZEK100 magnesium alloys. 658:33-41. 2016
Bending properties of functionally graded 300M steels. 653:63-70. 2016
Light iron and hard magnesium nanocomposites. 651:987-990. 2016
Microstructures and failure analyses of DP980 laser welded blanks in formability context. 652:250-263. 2016
Modelling the constitutive behaviour of aluminium alloy B206 in the as-cast and artificially aged states. 649:382-389. 2016
Microstructure modification and bendability improvement of AZ31 magnesium sheet by bending–unbending and annealing process. 648:371-384. 2015
Static softening following multistage hot deformation of 7150 aluminum alloy: Experiment and modeling. 648:164-177. 2015
Control of interfacial intermetallic compounds in Fe–Al joining by Zn addition. 645:323-327. 2015
Damage and fracture of dual-phase steels: Influence of martensite volume fraction. 646:322-331. 2015
Hot deformation behaviour of Ni–30Fe–C and Ni–30Fe–Nb–C model alloys. 641:160-171. 2015
Nano-sized precipitation and properties of a low carbon niobium micro-alloyed bainitic steel. 641:37-44. 2015
Microstructure refinement of dual-phase steels with 3.5wt% Mn: Influence on plastic and fracture behavior. 638:78-89. 2015
Numerical study of surface roughening in blow-formed aluminum bottle with crystal plasticity. 638:97-105. 2015
Towards the microstructure design of DP steels: A generic size-sensitive mean-field mechanical model. 637:222-234. 2015
An examination of the formation of adiabatic shear bands in AISI 4340 steel through analysis of grains and grain deformation. 631:18-26. 2015
A constitutive model of twin nucleation, propagation and growth in magnesium crystals. 625:140-145. 2015
New insights to the effects of ausforming on the bainitic transformation. 626:34-40. 2015
Characterization and modeling of mechanical behavior of quenching and partitioning steels. 620:293-300. 2015
Effect of carbon content on the mechanical properties and microstructural evolution of Fe–22Mn–C steels. 621:118-127. 2015
Large deformation of magnesium sheet at room temperature by preform annealing part I: Uniaxial tension. 619:370-377. 2014
Large deformation of magnesium sheet at room temperature by preform annealing, part II: “Bending”. 619:378-383. 2014
Resistance spot welding of AZ series magnesium alloys: Effects of aluminum content on microstructure and mechanical properties. 618:323-334. 2014
The anisotropy and diverse mechanical properties of rolled Mg–3% Al–1% Zn alloy. 618:523-532. 2014
Decoupling of the softening processes during rapid tempering of a martensitic steel. 615:395-404. 2014
Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact. 615:373-394. 2014
Influence of prior austenite grain size on martensite–austenite constituent and toughness in the heat affected zone of 700MPa high strength linepipe steel. 616:141-147. 2014
Failure analysis of fusion clad alloy system AA3003/AA6xxx sheet under bending. 610:263-272. 2014
Microstructure and mechanical properties of a mixed Si–Al TRIP-assisted steel subjected to continuous galvanizing heat treatments. 608:249-257. 2014
Microstructure-properties correlation in fiber laser welding of dual-phase and HSLA steels. 607:445-453. 2014
Modeling of critical grain size for shifting plasticity enhancement to decrease by refining grain size. 607:302-306. 2014
A systematic study of grain refinement during impact of 4340 steel. 605:270-285. 2014
Effect of Sr-modification on the bendability of cast aluminum alloy A356 using digital image correlation method. 598:277-287. 2014
Effects of extrusion parameters on the microstructure and mechanical properties of Mg–Zn–(Mn)–Ce/Gd alloys. 598:396-406. 2014
The Bauschinger effect in drawn and annealed nanocomposite Cu–Nb wires. 597:10-19. 2014
Controlled Diffusion Solidification (CDS) of Al-Zn-Mg-Cu (7050): Microstructure, heat treatment and mechanical properties. 594:260-277. 2014
Experimental study of fracture behavior of magnesium single crystals. 590:174-185. 2014
Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700°C. 588:14-21. 2013
Al 5083/SiCp composites produced by continual annealing and roll-bonding. 585:415-421. 2013
Damage evolution in TWIP and standard austenitic steel by means of 3D X ray tomography. 579:92-98. 2013
Development and characterisation of model TRIP steel microstructures. 576:108-117. 2013
Mechanical behavior of a compositionally graded 300M steel. 578:140-149. 2013
Compression of crumpled aluminum thin foils and comparison with other cellular materials. 570:1-7. 2013
Numerical investigation and experimental validation of physically based advanced GTN model for DP steels. 569:1-12. 2013
Determination of the constitutive behaviour of AA6022-T4 aluminium alloy spot welds at large strains. 567:95-100. 2013
Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet. 567:101-109. 2013
Constitutive modeling of AZ31 sheet alloy with application to axial crushing. 565:203-212. 2013
Tensile and fatigue properties of weld-bonded and adhesive-bonded magnesium alloy joints. 563:125-132. 2013
Lattice strain measurements using synchrotron diffraction to calibrate a micromechanical modeling in a ferrite–cementite steel. 561:67-77. 2013
Investigation on the microstructure and toughness of coarse grained heat affected zone in X-100 multi-phase pipeline steel with high Nb content. 558:692-701. 2012
A constitutive model of twinning and detwinning for hexagonal close packed polycrystals. 555:93-98. 2012
Microstructure and fatigue performance of single and multiple linear fiber laser welded DP980 dual-phase steel. 553:51-58. 2012
Microstructure–hardness relationship in the fusion zone of TRIP steel welds. 551:73-81. 2012
Strain localization and damage development during bending of Al–Mg alloy sheets. 550:395-407. 2012
Effect of heat treatment on stability of impact-induced adiabatic shear bands in 4340 steel. 546:223-232. 2012
Investigation on the crystallography of reverted structure and its effect on the properties of low carbon steel. 546:111-118. 2012
Effect of Zn on the microstructure evolution of extruded Mg–3Nd (–Zn)–Zr (wt.%) alloys. 543:12-21. 2012
Material flow and microstructural evolution during friction stir spot welding of AZ31 magnesium alloy. 543:200-209. 2012
Evolution of microstructure and mechanical properties of medium Mn steels during double annealing. 542:31-39. 2012
Recrystallization induced plasticity in austenite and ferrite. 541:196-198. 2012
The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy. 542:79-87. 2012
Microstructure and mechanical properties of weld-bonded and resistance spot welded magnesium-to-steel dissimilar joints. 537:11-24. 2012
Microstructure and properties of 13Cr5Ni1Mo0.025Nb0.09V0.06N super martensitic stainless steel. 539:271-279. 2012
Hydrogen trapping by VC precipitates and structural defects in a high strength Fe–Mn–C steel studied by small-angle neutron scattering. 536:110-116. 2012
The deformation behavior and processing maps in the isothermal compression of 7A09 aluminum alloy. 532:548-557. 2012
Effect of prior heat treatment on the dynamic impact behavior of 4340 steel and formation of adiabatic shear bands. 528:8700-8708. 2011
Resistance spot weld fatigue behavior and dislocation substructures in two different heats of AZ31 magnesium alloy. 529:81-87. 2011
Texture and mechanical behavior evolution of age-hardenable Mg–Nd–Zn extrusions during aging treatment. 529:151-155. 2011
Effect of dynamic strain aging on the appearance of the rare earth texture component in magnesium alloys. 528:6596-6605. 2011
Role of Nb in low interstitial 13Cr super martensitic stainless steel. 528:6812-6818. 2011
Mechanical properties of the aluminum roll-bond laminate AA5005–AA5083–AA5005. 528:6186-6193. 2011
Damage development in low alloy TRIP-aided steels during air-bending. 528:5241-5250. 2011
Deformation inhomogeneity in large-grained AA5754 sheets. 528:4187-4198. 2011
Microstructure modifications induced by a laser surface treatment in an AA7449 aluminium alloy. 528:2736-2747. 2011
The impact of particle distributions and grain-level inhomogeneities on post-necking deformation and fracture in AA5754 sheet alloys during uniaxial tension. 528:2002-2016. 2011
Cyclic deformation and twinning in a semi-solid processed AZ91D magnesium alloy. 528:208-219. 2010
An approach to define the effective lath size controlling yield strength of bainite. 527:6614-6619. 2010
Effects of local phase conversion on the tensile loading of pulsed Nd:YAG laser processed Nitinol. 527:6235-6238. 2010
Recrystallization and strain accumulation behaviors of high Nb-bearing line pipe steel in plate and strip rolling. 527:4985-4992. 2010
Effects of basal texture on mechanical behaviour of magnesium alloy AZ31B sheet. 527:3588-3594. 2010
Microstructural features controlling the deformation and recrystallization behaviour Fe–30%Mn and Fe–30%Mn–0.5%C. 527:3785-3791. 2010
Tensile properties and strain-hardening behavior of double-sided arc welded and friction stir welded AZ31B magnesium alloy. 527:2951-2961. 2010
EBSD study of the substructure development with cold deformation of dual phase steel. 527:947-953. 2010
Microstructure and mechanical properties of laser welded DP600 steel joints. 527:1215-1222. 2010
High strain-rate fracture and failure of a high strength low alloy steel in compression. 525:96-101. 2009
Study of the early stages of clustering in Al–Mg–Si alloys using the electrical resistivity measurements. 525:186-191. 2009
Effective strain rate sensitivity of two phase materials. 524:186-192. 2009
Effect of martensite distribution on damage behaviour in DP600 dual phase steels. 516:7-16. 2009
On the activation of recrystallization nucleation sites in Cu and Fe. 502:70-78. 2009
Tensile properties of as-cast aluminum alloys AA3104, AA6111 and CA31218 at above solidus temperatures. 497:388-394. 2008
Texture evolution in AA5754 alloys deformed in tension. 497:65-73. 2008
Effects of heat treatment on microstructure and tensile deformation of Mg AZ80 alloy at room temperature. 496:247-255. 2008
Microstructure based modeling for the mechanical behavior of ferrite–pearlite steels suitable to capture isotropic and kinematic hardening. 496:329-336. 2008
Precipitation microstructures in an AA6056 aluminium alloy after friction stir welding: Characterisation and modelling. 496:77-89. 2008
A new methodology for measurement of semi-solid constitutive behavior and its application to examination of as-cast porosity and hot tearing in aluminum alloys. 491:237-247. 2008
Analysis of the Fe–Zn interface of galvanized high Al–low Si TRIP steels. 491:39-46. 2008
Compositionally graded steels: The effect of partial decarburization on the mechanical properties of spherodite and pearlite. 491:80-87. 2008
Plastic deformation of Al and AA5754 between 4.2K and 295K. 491:88-102. 2008
Evolution of adiabatic shear bands in a dual-phase steel at very high strain rates. 488:235-240. 2008
Observation of void nucleation, growth and coalescence in a model metal matrix composite using X-ray tomography. 488:435-445. 2008
Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6. 486:85-95. 2008
Dynamic shear band formation in Aluminum 6061-T6 and Aluminum 6061-T6/Al2O3 composites. 457:114-119. 2007
Effect of processing route on the spatial distributions of constituent particles and their role in the fracture process in AA5754 alloy sheet materials. 456:85-92. 2007
Dislocation density-based modelling of plastic deformation of Zircaloy-4. 443:77-86. 2007
Correlation of ridging and texture in ferritic stainless steel sheet. 427:241-245. 2006
Ultra-fine grain size control and mixed grains elimination in industrial multi-pass rolling processing. 426:235-239. 2006
Analysis of ridging in ferritic stainless steel sheet. 423:300-305. 2006
FIB and TEM characterization of subsurfaces of an Al–Si alloy (A390) subjected to sliding wear. 421:317-327. 2006
Effect of heat treatment on adiabatic shear bands in a high-strength low alloy steel. 419:69-75. 2006
A model for the effect of creep deformation and intrinsic growth stress on oxide/nitride scale growth rates with application to the nitridation of γ-TiAl. 415:94-103. 2006
Mg alloy infiltrated Si–O–C ceramic foams. 403:215-221. 2005
Laser weldability of Pt and Ti alloys. 397:8-15. 2005
Prediction of shear localization during large deformation of a continuous cast Al–Mg sheet. 394:192-203. 2005
Effect of reverse dome stretching on dome height and forming limits of sheet materials. 390:210-216. 2005
Cyclic stress–strain behavior of polycrystalline nickel. 385:140-147. 2004
Rationalization of the softening and recrystallization behaviour of microalloyed austenite using mechanism maps. 382:64-81. 2004
Finite elements computation for the elastic properties of a regular stacking of hollow spheres. 379:240-244. 2004
Tensile properties and bendability of T4 treated AA6111 aluminum alloys. 369:258-266. 2004
Effect of cube texture on sheet metal formability. 364:182-187. 2004
Cyclic stress–strain response and dislocation structures in polycrystalline aluminum. 359:220-227. 2003
Dynamic mechanical properties in relation to adiabatic shear band formation in titanium alloy-Ti17. 358:128-133. 2003
A physically based model for TRIP-aided carbon steels behaviour. 356:145-152. 2003
On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy. 356:326-336. 2003
Al2MgO4, Fe3O4, and FeB impurities in AlMgB14. 351:117-122. 2003
Low shear rate behavior at high solid fractions of partially solidified Al–8 wt.% Cu alloys. 337:1-11. 2002
Tensile and bending properties of AA5754 aluminum alloys. 316:52-59. 2001
Effect of particle distribution on deformation and damage of two-phase alloys. 317:108-114. 2001
An analysis of microhardness of single-quasicrystals in the Al–Cu–Co–Si system. 315:202-210. 2001
Characterization and modeling of precipitation kinetics in an Al–Zn–Mg alloy. 293:267-274. 2000
Inhibition of grain growth by particle distribution: effect of spatial heterogeneities and of particle strength dispersion. 292:34-39. 2000
Basic aspects of the co-deformation of bcc/fcc materials. 272:90-98. 1999
The contribution of viscous flow to creep deformation of silicon nitride. 271:257-265. 1999
The fabrication, properties and microstructure of Cu–Ag and Cu–Nb composite conductors. 267:99-114. 1999
Finite element modeling of the formation of adiabatic shear bands in AISI 4340 steel. 266:255-260. 1999
A model for damage in a clustered particulate composite. 262:264-270. 1999
Deep drawing characteristics of automotive aluminum alloys. 256:69-82. 1998
Effect of low cycle fatigue on subsequent high cycle fatigue life of 316L stainless steel. 254:315-316. 1998
Study of fatigue damage in 7010 aluminum alloy. 254:207-218. 1998
Finite element modeling of the influence of anisotropic material properties on dislocations in metals. 251:94-99. 1998
Influence of quench and heating rates on the ageing response of an Al–Zn–Mg–(Zr) alloy. 251:200-207. 1998
Microstructural evolution during recovery in Al–2.5%Mg alloys. 248:187-197. 1998
Microstructural aspects of superplastic deformation of Al2O3/ZrO2 laminate composites. 219:148-155. 1996
Study of large strain deformation of dilute solid solutions of Al-Cu using channel-die compression. 207:143-152. 1996
The Bauschinger effect in a particulate reinforced Al alloy. 207:1-11. 1996
Structure and properties of AlSiC foam. 199:195-203. 1995
Finite element modelling of residual stresses and strength differential effect in discontinuously reinforced metal matrix composites. 183:111-120. 1994
Evaluation of fatigue-crack initiation at inclusions in fully pearlitic steels. 167:107-113. 1993
Deuterium permeation in polycrystalline nickel pre-implanted with nickel and helium ions. 158:71-78. 1992
The deformation of CuW laminates. 148:175-178. 1991
Microstructural characteristics in α phase during superplastic deformation of Ti6Al4V. 145:205-214. 1991
Corrosion-resistant silica coatings obtained by plasma-assisted chemical vapour deposition. 139:91-102. 1991
Strain rate sensitivity effects with forming characteristics of superplastic Ti6Al4V. 138:205-211. 1991
Evolution of internal stress variables during cyclic deformation of copper. 128:183-193. 1990
Ductile fracture mechanisms in AISI 4340 steel. 125:43-48. 1990
On the stability of amorphous silica coatings for high-temperature service. 120-121:461-466. 1989
The behaviour of aluminium-chromium ferritic steels in simulated coal gasification atmospheres at 723 K. 120-121:677-683. 1989
Mathematical prediction of dislocation cell sizes with strain using the mesh-length theory of work hardening. 113:367-371. 1989
Effect of plastic deformation on the microstructure and properties of amorphous polycarbonate. 110:223-229. 1989
A study of the effect of initial grain size and strain rate on dislocation structures in copper. 108:241-245. 1989
Fracture topography of commercial copper. 108:81-86. 1989
The influence of hydrostatic pressure on the ductility of AlSiC composites. 107:63-69. 1989
The role of particle distribution in recrystallization in two-phase alloys. 104:163-168. 1988
A note on dislocation-cell structures in commercial copper. 103:L1-L4. 1988
Analysis of high-temperature creep deformation in a polycrystalline nickel-base superalloy 2009
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel 2008
The mechanical response of compositionally graded materials 2008
The production of fine-scale microstructures by rapid annealing 2008
Development of the surface structure of TRIP steels prior to hot-dip galvanizing 2007
Effect of annealing atmosphere on the galvanizing behavior of a dual-phase steel 2007
A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel 2004
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys 2004
Homogeneous deformation of bulk metallic glasses in the super-cooled liquid state 2004
Modeling of mechanical twinning in a high manganese content austenitic steel 2004
Strengthening via the formation of strain-induced martensite in stainless steels 2004
Bulk metallic glasses: what are they good for? 2004
The influence of aging on the microstructure and creep behaviour of a γ-Ti–48%Al–2%W intermetallic 2002
High temperature cleavage fracture in 5383 aluminum alloy 2001
Modelling of TWIP effect on work-hardening 2001
Optimizing aluminum alloys: physically based modeling and materials selection 2001
The mechanical properties of fine-scale two-phase materials 2001
Irradiation hardening by interstitial loops: atomistic study and micromechanical model 2001
Crystallization behavior of amorphous Al84Y9Ni5Co2 alloy 2001
Magnetic properties of SmCo/Cr thin films with Cr under different preparation conditions 2001
Magnetic properties of SmCo/Fe/SmCo trilayer films 2001
Predictions of forming limit diagrams using crystal plasticity models 1998
Anomalous strain hardening behaviour of a supersaturated Al-Zn-Mg alloy 1997
Characterization of dislocation structures and internai stresses in Al-Mg alloys during recovery by synchrotron radiation 1997
Damage and rupture mechanisms in a bipercolated material: the example of austenoferritic duplex steels 1997
Influence of second-phase morphology and topology on mechanical and fracture properties of Al-Si alloys 1997
Kinetics and statistics of jerky flow: experiments and computer simulations 1997
On grain boundary facetting under stress during high temperature deformation of Al and Al-Ga alloys 1997
The deformation of copper single crystals at 4.2 °K 1997
The effect of natural ageing on the evolution of yield strength during artificial ageing for Al-Mg-Si-Cu alloys 1997
The role of heterogeneity on the flow and fracture of two-phase materials 1997
Clusters, plasticity and damage: a missing link? 1994
Recommendations on modeling polyphase plasticity: conclusions of panel discussions 1994
Structural aspects of materials subjected to large strains 1994
Plastic instabilities and their relation to fracture 1993
Room temperature microindentation of single-crystal MoSi2 1992

Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Journal

Overview

publication venue for

has subject area

Identity

International Standard Serial Number (ISSN)

Electronic International Standard Serial Number (EISSN)